Starting The Washing Programme - Smeg Washer-Dryer Instruction Manual

4.12 TIME TO END
1. The Time to End key can be pressed repeatedly to select the time after which the washing programme
will end. The time to end of cycle function calculates the initial duration of the washing/drying cycle, the
settings made (temperature, spin speed and options) which may shorten or lengthen the cycle's initial du-
ration, and the delay time the user wishes to add before the cycle starts.
2. After the time to end has been set, the symbol on the display remains on.
3. To annul the Time to End function, keep pressing the key repeatedly until the display shows 0.
4. The Start Pause symbol flashes on and off until the cycle starts. After the cycle starts, the symbol re-
mains constantly lit.

4.13 STARTING THE WASHING PROGRAMME

1. To start the washing programme after making your personal settings, press the Start Pause button.
2. Once the cycle has started, the display shows the time remaining before the end of the cycle and the
Start Pause symbol on the display is constantly on.
3. During performance of the washing/drying programme, the symbols which identify the various phases
light up:
Cycle phase symbols: Prewash, wash, rinses, final spin and dry.
Time to end symbol
Time to end button
EN
Start pause symbol
Start Pause
14