Mitsubishi VS-50800 Owner's Manual page 96

Problem
• The remote control doesn't
work.
• The TV takes several
seconds to respond to
channel commands.
• You can't access a channel
from Channel up/down.
• On-screen displays appear
each time you adjust a
function.
• You can't program the TV to
turn on automatically.
94
Troubleshooting
Possible Solution
• Check that the batteries are
installed correctly.
• Check that the select switch
is set to "TV".
• Be sure that you are
pointing the tip of the
remote control toward the
TV from a distance of no
more than 20 feet.
• Use the ENTER/EXCH
button to avoid delays.
• Enter 3 digits for channel.
• Be sure that the channel
you want to view is pro-
grammed into memory.
• Check that the TV is tuned
to the correct input source
(antenna) for that channel.
• This is part of the normal
operation of the TV.
• The TV may be locked.
• Time is not set
Chapter 4: Troubleshooting
For More Information
• See Getting Ready to Use
the Remote Control in
Chapter 1 for an explanation
of how to install batteries in
the remote control.
• See Remote Control Buttons
and Functions in Chapter 1,
which explains where the
select switch is located.
• See Getting Ready to Use
the Remote Control in
Chapter 1, which contains
pointers for using the remote
control.
• See Changing Channels in
Chapter 3, which explains
the function of the ENTER/
EXCH button.
• See Memorizing Channels in
Chapter 3, which explains
how to program channels
into the TV's memory.
• See Selecting the Input
Source in Chapter 3, which
explains how to change the
input source.
• See Understanding Screen
Displays in Chapter 4 for a
full explanation of the on-
screen displays.
• See Using the Parental Lock
within Using the Advanced
Features in Chapter 3.
• See Setting the Clock in
Chapter 3.