Creating The Av Connection (Home Theater) - Mitsubishi VS-50800 Owner's Manual

Equipment
Connected
VCR without
Active AV Network
VCR with
Active AV Network
non-remote
controlled receiver
or stereo system
VCR with Active
AV Network,
remote controlled
receiver or
stereo system
Home Theater AV
receiver with remote,
VCR (any) and any
other AV equipment
Home Theater AV
receiver with remote,
VCR (any) and any
other AV equipment
Using a combination
of video and S-Video
cables.
36
Creating the A/V Connection (Home Theater)
The AV Connection allows you to customize the way your TV works with
other audio and video components. Full use of the system and components
will provide you with a completely integrated home theater experience.
The features you can adjust are:
• AV Network: for use with selected Mitsubishi VCR's. The
adjustments are: Off, Basic or Active
• External Audio System: when the TV is being used with an
AV Receiver, Audio Receiver or Stereo System. The adjustments
are: Yes or No. To hear the audio through the TV speakers,
select No.
• AV Receiver at Input 1: for use when an AV receiver is
connected to Input 1, to ensure your best audio and video
performance. The adjustments are Yes or No.
• Volume Changed by AV Receiver: to vary the audio output
level from the TV to the AV Receiver using the TV's Volume
Control, select No. If you have an AV Receiver that cannot be
controlled using a remote control, select No. Select Yes to have
the TV output a fixed audio output level to the AV Receiver.
Setting choices vary, depending on which components are connected to the
TV. Below is a chart of common combinations and the recommended settings.
Detailed information for each feature and setting instruction can be found in
the following pages.
TV connection
used
VCR Output to:
TV Input 1.
VCR Output to:
TV Input 1.
TV Audio Outputs to:
stereo system inputs.
VCR Output to:
TV Input 1.
TV Audio Outputs to:
stereo system inputs.
TV Monitor video and
audio outputs to the AV
receiver's TV input. Other
AV equipment connected
to AV receiver. AV
Monitor video output
to TV input 1. [Note:
Component DVD should
be connected to INPUT-3]
TV Monitor video and
audio outputs to the AV
receiver's TV input. Other
AV equipment with
component and S-Video
outputs to the AV
receiver's inputs. AV
receiver's monitor video
and S-Video outputs to
TV Inputs 1 and 2. [Note:
Component DVD should
be connected to INPUT-3]
Chapter 2: Operating Your TV
TV Feature Setting
Active AV External
Network Audio System
Off No
Active Yes
(also set VCR
AV Network
to On)
Yes
Active
(also set VCR
AV Network
to On)
Off Yes
Off Yes
AV Receiver
Volume Changed
at Input 1
by AV Receiver
No No
No
No
Yes
No
(use the remote
for the receiver or
stereo to control
the volume)
Yes
Yes
(use the remote
for the AV
receiver to
control the
volume)
Yes
Yes
(use the remote
for the AV
receiver to
control the
volume)