Audio; Others - JVC UX-QD90S Instructions Manual

AUDIO

Items Contents (
DIGITAL Select an output signal type from the following
AUDIO in accordance with the equipment connected
OUTPUT to the digital audio output terminal (AV
amplifier, etc.). (See the list below for the
preference items and output signal.)
PCM ONLY:
Equipment corresponding only to linear PCM.
DOLBY DIGITAL/PCM:
Dolby digital decoder or equipment having the
same function.
STREAM/PCM
DTS/Dolby digital decoder or equipment
having the same function.
DOWN MIX Switch signal from the digital output terminal of
the DVD VIDEO according to the connected
equipment. Select this when "DIGITAL AUDIO
OUTPUT" is set to "PCM ONLY".
DOLBY SURROUND:
A dolby pro logic decoder-built-in equipment.
STEREO :
An ordinary equipment.
• When 3D phonic is activated, Down Mix
does not work.
D (Dynamic). To make adjustments for the difference
RANGE between a high volume and a low volume
COMPRESSION when playing back with low volume (only for a
DVD recorded with Dolby digital).
AUTO
:
D. range compression automatically works.
ON:
D. range compression always works.
List of relationships of DIGITAL AUDIO OUTPUT preference items and output
signal
Playback disc
48 kHz, 16/20/24-bit
Linear PCM DVD VIDEO
96 kHz linear PCM DVD VIDEO
48/96/192 kHz,
16/20/24-bit linear PCM DVD AUDIO*
44.1/88.2/176.4 kHz,
16/20/24-bit linear PCM DVD AUDIO*
DTS DVD VIDEO/DVD AUDIO
DOLBY DIGITAL DVD VIDEO/
DVD AUDIO*
CD/VCD/SVCD
DTS CD
MP3/WMA disc
NOTE
* Copyright-protected DVD AUDIOs do not output signals.
• Among DVD VIDEOs without copyright protection, there may be some DVD VIDEOs that output a 20- or 24-bit sig-
nal through the digital audio output terminals.
• Sound sources other than those shown in the table above do not output signals.
: initial setting)
:
STREAM/PCM
DTS bit stream
DOLBY DIGITAL bit stream
44.1 kHz, 16-bit stereo linear PCM/48 kHz, 16-bit linear PCM
DTS bit stream

OTHERS

Items Contents (
RESUME Select ON
ON SCREEN Select whether you display guide icons on the
GUIDE on-screen guide indicating status of a disc/
main unit. (For details on the guide icons, refer
to page 24)
AV COMPU When you want to control JVC TV by using
LINK MODE this product, select a mode that matches the
terminal from the following.
(For more details, refer to "Using AV COMPU
LINK" on page 51.)
DVD1 :
Connect to the video-3 input on the TV set or
the DVD input on the amplifier.
DVD2:
Connect to the video-1 input of the TV set.
DVD3:
Connect to the video-2 input of the TV set.
DIGITAL AUDIO OUTPUT preference
DOLBY DIGITAL/PCM
48 kHz, 16-bit stereo linear PCM
48 kHz, 16-bit stereo linear PCM
44.1 kHz, 16-bit stereo linear PCM
48 kHz, 16-bit stereo linear PCM
44.1 kHz, 16-bit linear PCM
32/44.1/48 kHz, 16-bit linear PCM
: initial setting)
or OFF. ( page 25)
Listening to Discs
PCM ONLY
48 kHz, 16-bit stereo linear
PCM
40