Table of Contents
Advertisement
2-2. Rack Mounting
(4) Temporarily secure the bracket to the outer member assembly 1 to both sides of the rack by the
eight screws (C4 x 12) and the eight washers (W4) supplied with RMM-18DV. Adjust the installa-
tion position of the outer member to meet the specification shown in the figure. After the adjustment,
tighten the screws (B4 x 8) temporarily secured in the step (3). (Fig. 4)
Plate nut (Short)
Rack
C4 x 12
W4
(5) Install the unit in the rack while releasing the stopper of the inner member.
(6) After confirming that the unit can be moved smoothly, tighten the screws (C4 x 12) temporarily
secured in the step (4). (Fig. 5)
Rack
Outer member2
DVS-7000A
Inner member
2-4
Outer member
Bracket
12.7
44.45
(Fig. 4)
Stopper
(Fig. 5)
TOP VIEW
Rack
C4 x 12
W4
Spec
5
+
50
0
_
. When housing the set, shift the slide bearing as illustrated.
Inner member
Outer member2
Plate nut (Short)
Bracket
Outer member1
Slide bearing
DVS-7000AE IM
Advertisement
Table of Contents
