Table of Contents
Advertisement
6-2. Installation of Program (BZS-7020A)
(4) Press [F9] (YES) key.
The loading of the program starts.
(5) When loading is completed, "Load Complete. Insert the OPERATING PROGRAM 2." is indicated
on the display, and the display for the function keys is changed as follows.
F1
(6) Insert the "OPERATING PROGRAM 2" (Control panel software) to the floppy disk drive, and press
[F10] (EXEC) key.
Loading starts.
(7) When loading is completed, "Load Complete. Insert the OPERATING PROGRAM 3." is indicated,
and the display for the function keys is changed as follows.
n
When DMK-7000 is not used in the 3M/E system, press EXIT key to finish the installation.
F1
(8) Insert the OPERATING PROGRAM 3 (DMK-7000 software) to the disk drive, and press
[F10] (EXEC) key.
Loading starts.
(9) When loading is completed, all datum of the switcher, display panel and DMK-7000 are cleared.
6-6
F2
F3
F4
F5
F2
F3
F4
F5
EXEC
F9
F10
F6
F7
F8
EXEC
F9
F10
F6
F7
F8
DVS-7000AE IM
Advertisement
Table of Contents
