Set-Up; Confirmation Of The Software Version; Setting Of The Signal Format - Sony DVS-7000A Installation Manual

6-3. Set-up

6-3. Set-up
The processes to construct the system are described below.
Basically set up in the following sequence.
For any process that does not need to change the selection exists, no problem that the process is not re-
changed in this selection.

1. Confirmation of the Software Version

2. Setting of the Signal Format

3. Setting about System
DVS-7000A has many set-up systems besides these settings. And the contents of the set-up can be saved
to the floppy disk. For more details about contents and operation, refer to the following user's guide
(option).
User's Guide : BZS-7020A (for DVS-7300/7350 System)
n
If interrupting or terminating the set-up and saving the data into the Nonvolatile memory, execute "6-3-4.
Saving Set-up Data to Nonvolatile Memory".
6-9
DVS-7000AE IM