Status - Network Everywhere NR041 User Manual

Status

This screen displays the Router's current status; it reflects the data and selec-
tions you've entered using the Setup screen.
Note: The information provided and buttons available will vary
depending on the Router's settings.
All of the information provided on this screen is read-only. To make changes,
select the Setup tab.
Host Name This field shows the Router's name.
Firmware Version This field shows the installed version and date of the
firmware. Version dates are slightly more accurate than version numbers.
Login This indicates if you are using a dial-up style connection, e.g., PPPoE.
For PPPoE only, there is a Connect button to click if you are disconnected and
want to re-establish a connection.
30
Network Everywhere
Figure 6-7
Series Cable/DSL 4-Port Router
™
LAN These fields display the Router's current MAC Address, IP Address, and
Subnet Mask, as seen by users on your local area network. The DHCP Server
field shows the status of the Router's DHCP server function, which is either
enabled or disabled.
WAN These fields display the Router's current MAC Address, IP Address,
Subnet Mask, and Default Gateway IP Address, as seen by external users on the
Internet. The DNS (Domain Name System) IP Address fields show the IP
address(es) of the DNS server(s) currently used by the Router. Multiple DNS
IP settings are common. In most cases, the first available DNS entry is used.
DHCP Release Click the DHCP Release button to release the current IP
address of the device connected to the Router's Internet (or WAN) port.
DHCP Renew Click the DHCP Renew button to replace the Router's current
WAN IP address with a new IP address.
DHCP Clients Table Click the DHCP Clients Table button to view the list of
PCs that were given IP addresses by the Router.
DHCP
31