Network Everywhere NR041 User Manual page 17

• Device LAN IP Address and LAN Subnet Mask The values for the
Router's IP Address and Subnet Mask are shown here. The default values
are 192.168.1.1 for the Device IP Address and 255.255.255.0 for the Subnet
Mask.
• WAN Connection Type The Router supports three connection types:
DHCP, PPPoE, and Static IP. Each Setup screen and available features will
differ depending on what kind of connection type you select.
Note: You can test and see if the settings are correct by successfully
connecting to the Internet.
DHCP
By default, the Router's WAN Connection Type is set to Obtain an IP auto-
matically, and it should be used only if your ISP supports DHCP.
To apply any of the settings you change on this page, click the Apply but-
ton, and then click the Continue button. To cancel any values you've
entered on this page, click the Cancel button. Continue to the "Password"
section.
26
Network Everywhere
Figure 6-3
Series Cable/DSL 4-Port Router
™
Static IP
If you are required to use a permanent IP address, then select Static (Fixed)
IP address.
Specify WAN IP Address This is the Router's IP address, when seen from
the WAN, or the Internet. Your ISP will provide you with the IP Address you
need to specify here.
Subnet Mask This is the Router's Subnet Mask, as seen by external users
on the Internet (including your ISP). Your ISP will provide you with the
Subnet Mask.
Default Gateway Address Your ISP will provide you with the Default
Gateway Address, which is the ISP's IP address.
DNS (Required) Your ISP will provide you with at least one DNS (Domain
Name System) Server IP Address.
To apply any of the settings you change on this page, click the Apply but-
ton, and then click the Continue button. To cancel any values you've
entered on this page, click the Cancel button. Continue to the "Password"
section.
Figure 6-4
27