Admin Setup - Atlantis Land A02-AP2-W54M Manual

3.7.1 Admin Setup

In this section it is possible to set the device password.
It's necessary to insert password 2 times (to confirm it).
We suggest to note new password.
Click on Apply and Save to take effect.
If you lose password, it is possible to restore AP with factory default
setting (AP will lose any configuration).
Power on the device, press reset button until AP will reboot
(STATUS LED turn off).
When STATUS LED will blinking, release reset button.
Now, Wireless MIMO Multi-Function Access Point will restart with
factory setting.
Wireless MIMO Multi-Function Access Point
A02-AP2-W54M Pag. 42