Navman EZY255LMT User Manual page 73

If you want to...
use an existing custom POI category, select Existing category, then select a type from the
replace an existing POI,
create a new custom POI category,
4. Set alert settings as required:
If you want to...
enable a visual warning when a POI
of this category is in close proximity,
select an icon to display on the Map
screen for POIs of this category,
select the distance from a POI of this
category at which the visual warning
should display or the warning chime
should sound,
enable a warning sound when a POI
of this category is in close proximity,
select a custom sound alert file to
play when a POI of this category is
in close proximity,
5. Click Add to device to add the POI to your Navman.
Note: Each file corresponds to a POI category; for example, Hotels.csv will be listed on your
Navman as the Hotels category.
72
Then...
drop-down list.
select Existing category and a type from the drop-
down list, then select Replace existing POIs.
Note: If you want to create a new POI instead, then select
Add to existing POIs.
select New category, then type a name for the POI
category.
Then...
select the Visual alert checkbox.
click Browse to select the icon file from your local or
network drive.
ƒ When you have located the icon file, select it and
click Open.
ƒ The icon file must be a bitmap (*.bmp or *.png)
graphic with a minimum size of 6x6 pixels and a
maximum size of 32x32 pixels.
Note: If you do not select a custom icon, a default icon will
display.
select the distance from the Distance box.
Note: To change the units used to measure the distance for
this POI category, click My Navman  Options and from the
General option select Use metric units checkbox.
select the Audio alert checkbox.
do one of the followings:
ƒ Select a sound file from the list.
ƒ Click Add to select a sound file (.WAV format) from
your local or network drive. When you have located
the file, select it and click Open.
Note: If you do not select a custom sound file, a default
sound alert will play.