No Resistance Change Or Too Hard For Pedaling - Johnson C8000 Service Manual

No resistance change or too hard for pedaling

Possible causes:
1. Console is damaged or the console cable is not connected properly.
2. Console cable is damaged.
3. Generator is damaged.
4. Controller is damaged.
Fix:
1. Remove the console and check if the console cable has been connected
properly.
2. Remove the side covers and check if the console cable is connected well
to the controller properly.
3. Please make use of tools to confirm "Generator" have
conduct(10~15
If it is damage, Please replace "Generator"
If it is well, Please replace control board
Ω)
.
19