Sony TRINITRON KD-32FS130 Service Manual page 14

KD-32FS130 MODELS ONLY
- Install rotation coil lead wire connection under DY
clip.
- Dress RGB harness (MD/CN301~ C/CN705) over
Rotation coil lead wire.
-Dress RGB & Rotation coil lead wire harnesses
interlace twice as picture shows.
Rev 1.2
KD-32FS130/36FS130
Dress CRT ground behind DGC as picture shows.
Dress CRT ground beside V bord. Keep away from
Focus & Anodo cap wires. Connect CRT ground on
upper tap (CN703) as shown in picture
KD-32FS130/36FS130
32FS130
Focus &
Anodo cap
3/10
14