Progressive Scan Output; Enabling Progressive Scan Output; Disabling Progressive Scan - JVC DR-MX10SEK Instructions Manual

Progressive Scan Output

ABCDEFGHILM
9
By outputting progressive scan signals, DVD
Videos and more can be viewed with high
image quality.
9
Progressive scan images can be viewed on the
VHS via the [COMPONENT VIDEO OUT]
terminal.
A
IMPORTANT:
.. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . .
0
Use this function if connected to a TV compatible with
progressive scan using the component video terminal.
0
When setting to progressive scan output on the VHS,
check that the HDD or DVD has stopped.

Enabling Progressive Scan Output

A
Select the playback deck.
0
The current output format will be displayed on
the front display panel.
H EN
64
B, A
OR
B
Press PROGRESSIVE SCAN for more
than 3 seconds.
0
When progressive scan output is active, the q
mark will light up on the front display panel.
STANDBY/ON
PR
S-VIDEO VIDEO (MONO)L −AUDIO−R
REC
HDD/DVD F-1
q mark lights up

Disabling Progressive Scan

A
Press PROGRESSIVE SCAN for more
than 3 seconds.
0
q mark on the front display panel lights off.
To enable component output for VHS
A
Press HDD or DVD.
B
Setup Menu AL-1 OUTPUTB =
ACOMPONENTB [
C
Set the TV compatible with progressive
scan images to its COMPONENT input
mode.
D
Press PROGRESSIVE SCAN for more
than 3 seconds.
0
The q mark lights up on the front display
panel.
E
Press VHS.
0
The VHS lamp on the unit lights up.
F
Press PROGRESSIVE SCAN.
0
ACOMP OFFB will be displayed on the front
display panel for 5 seconds.
G
Press PROGRESSIVE SCAN again before
ACOMP ONB lights off.
0
ACOMP ONB is displayed and the q mark
lights up on the front display panel.
0
The VHS progressive image will be output
from the [COMPONENT VIDEO OUT]
terminal.
0
If PROGRESSIVE SCAN is pressed again while
ACOMP ONB is displayed, ACOMP OFFB will
be displayed, and VHS component output will
be disabled.
VHS − HDD − DVD −
q
P114] i