Preparations; Selecting Devices To Connect - JVC DR-MX10SEK Instructions Manual

Selecting Devices to Connect

9
Connection methods vary with the devices used. Refer also to the manuals of the devices to be
connected.
9
Turn off the devices before connecting.
Install if using the GUIDE Plus+ system via external
receiver.
Placing the IR Blaster (G-LINK)
Rear View
Connect with amplifier's digital input
Via Digital Audio (Coaxial)
Amplifier
H EN
18
External receiver
Do not place obstructions between
the IR blaster (G-LINK) and the
external receiver's infrared
receptor.
Connect with TV or amplifier input
Using Audio cable
Cooling fan
Power cord
Connect with IR blaster (G-LINK)
Cable, satellite broadcast
Connect with TV input
Via Component video
Connect with TV input
Via SCART connector
HDD/DVD/VHS HDD/DVD
L-1
COMPONENT
AUDIO OUT
VIDEO OUT IN/OUT
Y
LEFT P
B
L-2
RIGHT P IN/DECODER
R
HDD/DVD
PCM/
STREAM
G-LINK
COAXIAL
DIGITAL
AUDIO OUT
Connect with video output of external device
Or with input of external receiver
Antenna
External receiver
Connect with
antenna or cable
ANTENNA
IN
OUT
Connect with TV's
antenna terminal
TV
JVC