JVC DR-MX10SEK Instructions Manual page 101

Sound settings (VHS)
Receiving NICAM programmes.
Programme type
Regular Monaural
NICAM STEREO
NICAM Bilingual
NICAM Monaural
0
To listen to a stereo programme, press AUDIO until AHIFI L W X RB appears on the TV screen.
0
To listen to a bilingual programme, press AUDIO until AHIFI L WB or AHIFI X RB appears on the TV screen.
0
To listen to the standard (Regular Monaural) audio while receiving a NICAM broadcast, press AUDIO until
ANORMB appears on the TV screen.
0
Set the following for on-screen display. Setup Menu ASUPERIMPOSEB = AAUTOB [
Soundtrack selection on VHS
This unit can record three sound tracks (HI-FI L, HI-FI R, NORM), one of which can be selected during playback.
If AUDIO is pressed, the sound track changes as follows.
Track
On-screen display
HIFI
L W X R
HIFI
L W
HIFI
X R
NORM
HIFI
NORM
0
Usually select L W X R. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is
played back automatically for tapes with only normal audio.
0
Set the following for on-screen display. Setup Menu ASUPERIMPOSEB = AAUTOB [
(none)
ST NICAM
BIL. NICAM
NICAM
For tapes recorded in Hi-Fi stereo.
For main audio in tapes with bilingual recording.
For sub audio in tapes with bilingual recording.
When listening to tapes recorded in monaural sound.
When listening to tapes with post-recording editing.
On-screen display
P113] a
Purpose
P113] a
EN I 101