Samsung M267x series User Manual page 154

Installing driver over the network
Command- line Definition
/a"<dest_path>" or Specifies destination path
for installation.
/A"<dest_path>"
The destination
path should be a
fully qualified path.
/n"<Printer name>" Specifies printer name.
or Printer instance shall be
created as specified printer
/N"<Printer name>"
name.
/nd or Commands not to set the
installed driver as a default
/ND
machine driver.
Description
Since machine drivers
should be installed on the
OS specific location, this
command applies to only
application software.
With this parameter, you
can add printer instances as
your wishes.
It indicates installed
machine driver will not be
the default machine driver
on your system if there are
one or more printer drivers
installed. If there is no
installed machine driver on
your system, then this
option won't be applied
because Windows OS will
set installed printer driver as
a default machine driver.
Command- line Definition
/x or Uses existing machine
driver files to create printer
/X
instance if it is already
installed.
/up"<printer Removes only specified
name>" or printer instance and not the
driver files.
/UP"<printer
name>"
/d or Uninstalls all device drivers
and applications from your
/D
system.
/v"<share name>" or Shares installed machine
and add other available
/V"<share name>"
platform drivers for Point &
Print.
Description
This command provides a
way to install a printer
instance that uses installed
printer driver files without
installing an additional
driver.
This command provides a
way to remove only
specified printer instance
from your system without
effecting other printer
drivers. It will not remove
printer driver files from your
system.
This command will remove
all installed device drivers
and application software
from your system.
It will install all supported
Windows OS platform's
machine drivers to system
and share it with specified
<share name> for point and
print.
2. Using a Network-Connected Machine
154