Samsung M267x series User Manual page 153

Installing driver over the network
Silent installation Mode
Silent installation mode is an installation method that does not require any user
intervention. Once you start the installation, the machine driver and software
are automatically installed on you computer. You can start the silent installation
by typing /s or /S in the command window.
Command-line Parameters
Following table shows commands that can be used in the command window.
Following command-line are effective and operated when command is
used with /s or /S. But /h, /H or /? are exceptional commands that can be
operated solely.
Command- line Definition
/s or Starts silent installation.
/S
Description
Installs machine drivers
without prompting any UIs
or user intervention.
Command- line Definition
/p"<port name>" or Specifies printer port.
/P"<port name>"
Network Port will be
created by use of
Standard TCP/IP
Port monitor. For
local port, this port
must exist on
system before
being specified by
command.
Description
Printer port name can be
specified as IP address,
hostname, USB local port
name, IEEE1284 port name
or network path.
For example:
• /p"xxx.xxx.xxx.xxx" in
where, "xxx.xxx.xxx.xxx"
means IP address for
network printer. /
p"USB001", /P"LPT1:", /
p"hostname"
• /
p"\\computer_name\sha
red_printer" or
"\\xxx.xxx.xxx.xxx\shared
_printer" in where,
"\\computer_name\shar
ed_printer" or
"\\xxx.xxx.xxx.xxx\shared
_printer" means the
network path to the
printer by entering two
slashes, the computer
name or local IP address
of the PC sharing the
printer, and then the
share name of the
printer.
2. Using a Network-Connected Machine
153