Conﬁ guring the Player Settings
Press SETUP to display the SETUP menu.
Use ▲/▼ to select the type of settings and then press ▶.
Use ▲/▼ to select a setting item and then press ENTER.
Use ▲/▼ to conﬁ gure the setting and then press ENTER.
Some ﬁ les may not be included in repeat playback.
Depending on the video being played, changing the setting may have no visible eﬀ ect.
The TV resolution is displayed. (480p is just an example.)
When this content consists of Everio photo images, the date and time of the photo will be displayed in the
lower right-hand side of the screen when the ﬁ le is played back.
For specifying the language to be displayed for SETUP menu
screen and others. "English" is set as the default language.
(English / Français / Deutsch / Español / Italiano / Nederlands /
Português / Русский / 中文 )
Repeat playback is disabled.
Plays all the ﬁ les in a folder repeatedly.
• Repeat plays only ﬁ les of the same type as the selected ﬁ le.
• Linked repeat playback can also be used running from SD card
slot A to SD card slot B, but this only applies for movie ﬁ les record-
ed in AVCHD format.
See page 14.
Turns AVCHD Overlay Bitmap*
Restores the settings in place when you purchased the player.
Sets the screen size to match that of the connected TV. (When the
TV screen size is ﬁ xed, images are displayed using the TV's set-
tings regardless of the setting selected on the player.)
Forcibly converts ﬁ les to the NTSC system for playback.
Forcibly converts ﬁ les to the PAL system for playback. This setting
should not normally be used.
Displays images at the selected resolution.
Auto - 480p *³
Outputs the recommended TV resolution.
display on and oﬀ .