NEC IPK II User Manual

PLACING CALLS PLACING CALLS PLACING CALLS PLACING CALLS
Internal Calls Internal Calls
Internal Calls Internal Calls
1. Lift the handset.
2. Dial a station number
Note 1: Note 1: Note 1: Note 1: When calling a multi-line telephone, dialing 1 1 1 1 after the station number will change ringing to voice or voice
to ringing.
Note 2: To directly access a personal voice mailbox, dial 8 8 8 8 after dialing the station number. Note 2: Note 2: Note 2:
6
Outside Calls Outside Calls Outside Calls Outside Calls
1. Lift the handset.
2. Typically dial 9 9 9 9 OR OR press an idle Outside Line
OR OR
3. Dial the telephone number.
Last Number Redial Last Number Redial Last Number Redial Last Number Redial
1. Without lifting the handset, press the Redial
2. To redial the last number, press #, speaker or lift handset. OR
by pressing the Redial Soft Redial Soft- - - - key
Redial Soft Redial Soft
3. Lift the handset or press Speaker
Station Speed Dial Station Speed Dial — — — — Programming Programming
Station Speed Dial Station Speed Dial Programming Programming
To store store a Station Speed Dialing number (display telephones only): store store
1. Press the Speaker Speaker key.
Speaker Speaker
2. Dial 755 755. 755 755
3. Dial the Station Speed Dial buffer number to be programmed (0~9).
Note: 0 = Station Speed Dial buffer 10
4. Dial the Access Code (e.g., 9) - if required.
5. Dial telephone number you want to store (up to 24 digits).
Note: Note: Valid entries are 0~9, # and *. To enter a pause, press MIC Note: Note:
6. Press Hold Hold.
Hold Hold
7. Enter the name associated with the Speed Dialing number (display telephones only):
# # = Accepts an entry (only required if two letters on the same key are needed - ex: TOM). Pressing # again =
Space. Conf Clears the character entry one character at a time (used when entering the Name). EXIT Clears all the
entries from the point of the flashing cursor and to the right (used when entering the Number, this clears both the
number and name).
Multi- - - - line Telephone User Guide Multi line Telephone User Guide
Multi Multi line Telephone User Guide line Telephone User Guide
Outside Line key.
Outside Line Outside Line
Redial key. The last dialed number is displayed.
Redial Redial
key or VOLUME UP VOLUME UP or VOLUME DOWN VOLUME DOWN keys. (Scroll through last 10 numbers dialed)
key key VOLUME UP VOLUME UP VOLUME DOWN VOLUME DOWN
Speaker to place the call.
Speaker Speaker
NEC IPK II NEC IPK II NEC IPK II NEC IPK II
OR Search for the desired number from the Redial List OR OR
MIC. To store a Flash, press Recall MIC MIC Recall Recall. Recall