POWER: Switches the unit ON or OFF.
DVD: Selects the unit's mode to DVD.
VCR: Selects the unit's mode to VCR.
EJECT, OPEN/CLOSE: Opens and closes the disc tray, and
tape in the VCR deck
0-9 numerical buttons: Selects numbered options in a menu.
CLEAR: Removes a mark on the Marker Search menu.
AV/INPUT: Changes the input source (Tuner, AV1-2, or DV IN).
TV Control Buttons: You can control the sound level, input
source, selects TV's channel and power switch of your TV.
BACKWARD / FORWARD (m / M):
- DVD: Search backward or forward.
- VCR: Rewinds/Advances the tape during the STOP mode,
for fast reverse/forward picture search.
SKIP (. / >): Go to next or previous chapter or track.
PAUSE/STEP (X): Pause playback or recording temporarily.
PLAY (N): Starts playback.
STOP (x): Stops playback or recording.
HOME: Accesses or removes the HOME menu.
DISC MENU/LIST: Accesses menu on a DVD disc. Switches
between Title List-Original and Title List-Playlist menu.
DISPLAY: Accesses On-Screen Display.
RETURN (O): Removes the on-screen displays.
b / B / v / V (left/right/up/down):
Used to navigate on-screen displays.
): Acknowledges menu selection.
PR/CH TRK (+/-): Scans up or down through memorized
channels and adjust tracking.
): Selects an audio language or audio channel.
): Selects a subtitle language.
ZOOM: Enlarges DVD video image.
I.SKIP (INSTANT SKIP): Skips 30 seconds forward during
REC (z): Starts recording.
REC MODE: Selects the recording mode.
DUBBING : Press to copy DVD to VCR (or VCR to DVD)
TITLE: Displays the disc's Title menu, if available.
PLAY MODE: Selects a play mode.
MARKER: Marks any point during playback.
SEARCH: Displays Marker Search menu.
THUMBNAIL: Selects a thumbnail picture.
CHP. ADD: Inserts a chapter marker when playing/recording.
TIMESHIFT: Activates pause live TV/playback (timeshift) for
a live TV program.
Feature is not available.
Setting up the remote to control your TV
You can operate your TV with the supplied remote control.
If your TV is listed in the table below, set the appropriate
While holding down TV POWER button, and press the man-
ufacturer code for your TV with the numerical buttons (see
the table below). Release the TV POWER button to com-
LG / GoldStar
1 (Default), 2
1, 3, 4
Depending on your TV, some or all buttons may not function on
the TV, even after entering the correct manufacturer code.
When you replace the batteries of the remote, the code number
you have set may be reset to the default setting. Set the appro-
priate code number again.