LG RC389H User Instructions page 28

Time search
-RW -RW
VR Video
You can select the start time of a title by searching time. Select a title that you
want to search and press ENTER. Select [Time] in the [Search] option from the
menu on the left of the screen and press ENTER to display the [Search] menu.
Use to find the time you want to start. Each press of
b b B B
minute and press and hold b b B B to moves 5 minutes. Press ENTER to watch a
title from a selected time.
Hiding a chapter or title
+RW
You can skip through playing chapters or titles without actually deleting them.
Select a chapter or title you want to hide and press ENTER. Select [Hide] in the
[Edit] option then press ENTER.
If you want to recover the hidden title or chapter, select the hidden title or chap-
ter and press ENTER. Select [Show] in the [Edit] option then press ENTER to
recover it.
Dividing a title
+RW
Use this function to split a title up into two titles. Select a title that you want to
divide and press ENTER. Select [Divide] in the [Edit] option from the menu on
the left of the screen and press ENTER to display the [Divide] menu. Find the
point you want to divide the title using PLAY, SCAN, PAUSE/STEP buttons and
press ENTER while [Divide] option is selected. The playback screen shows the
divided point. Select [Done] option and press ENTER
28
+RW +R -R RAM
to moves 1
b b B B
+R
Protect a title
-RW +RW
VR
Use this function to protect a title against accidental recording, editing or delet-
ing. Select a title you want to protect and press ENTER. Select [Protect] option
from the menu on the left and press ENTER. The lock mark will appear on the
title thumbnail.
If you want to unprotect the title, select the protected title and press ENTER.
Select [Unprotect] option from the menu on the left and press ENTER to unpro-
tect it.
Deleting a part
-RW RAM
VR
You can delete a part which you do not want in the title.
Select a title that you want to delete part of and press ENTER. Select [Delete
Part] in the [Edit] option from the menu on the left of the screen and press
ENTER to display the [Delete part] menu. You can find the point using PLAY,
SCAN, PAUSE/STEP buttons.
[Start Point]: Select the starting point of a part that you want to delete then
press ENTER.
[End Point]: Select the end point of a part that you want to delete then press
ENTER.
[Cancel]: Press ENTER to cancel the selected part.
[Done]: Press ENTER to delete the selected part.
+R RAM