Using Ac Power - JVC LYT0633-001A Instructions Manual

1
2
ATTENTION:
Before detaching the power source,
make sure that the camcorder's power
is turned off. Failure to do so can result
in a camcorder malfunction.
INFORMATION:
VU-V856KIT is a set composed of the
BN-V856U battery pack and AA-V80EG or
AA-V80EK AC Power Adapter/Charger.
Read the VU-V856KIT's instruction manuals
before using.
It is impossible to charge the BN-V856U battery
pack using the provided AC Power Adapter/
Charger. Use the optional AA-V80EG or
AA-V80EK AC Power Adapter/Charger.
To AC outlet
AC Power
Adapter/
Charger
To DC OUT
terminal
To battery
pack mount
BATT. RELEASE
Switch
Power cord
DC cord
USING THE BATTERY PACK
1
Insert the terminal end
battery pack mount, then firmly push the end
the battery pack in the direction of the arrow until it
locks into place as shown in the illustration.
•If the battery pack is attached in the wrong position,
a malfunction may occur.
To Detach The Battery Pack . . .
.... while sliding down BATT. RELEASE, detach it.
Approximate recording time
Battery pack LCD monitor on/
Viewfinder off
BN-V507U
BN-V514U 1 hr. 50 min.
(optional)
BN-V856U 7 hrs. 30 min.
(optional)
NOTES:
Recording time is reduced significantly under the
following conditions:
• Zoom or Record-Standby mode is engaged repeatedly.
• The LCD monitor is used repeatedly.
• The playback mode is engaged repeatedly.
Before extended use, it is recommended that you
prepare enough battery packs to cover 3 times the
planned shooting time.

USING AC POWER

Use the AC Power Adapter/Charger (connect as shown in
the illustration).
NOTES:
The provided AC Power Adapter/Charger features
automatic voltage selection in the AC range from 110 V
to 240 V.
For other notes, pg. 6.
1
of the battery pack into the
LCD monitor off/
Viewfinder on
55 min. 1 hr. 5 min.
2 hrs. 10 min.
9 hrs.
7
EN
2
of