Dubbing; Dubbing To A Vcr - JVC LYT0633-001A Instructions Manual

42
EN
POWER Switch
Lock Button
Red to
AUDIO R
White to
AUDIO L
Audio/Video cable
[RCA plug to RCA
plug] (optional)
Cable Adapter
(provided)
If your VCR has a
SCART connector,
use the provided
cable adapter.
* Connect when an S-Video cable is not used.
To S
Yellow to
VIDEO*
Core filter
S-Video
cable
(optional)
To AUDIO,
VIDEO*
and -IN
connectors
"Y/C"/"CVBS"
video out
select switch
VCR
TV

Dubbing To A VCR

1
Following the illustration, connect the camcorder and
the VCR. Also refer to pg. 38 and 39.
2
Set the camcorder's POWER Switch to "
while pressing down the Lock Button located on the
switch, turn on the VCR's power, and insert the
appropriate cassettes in the camcorder and the VCR.
3
Engage the VCR's AUX and Record-Pause modes.
4
Engage the camcorder's Play mode to find a spot just
before the edit-in point. Once it is reached, press
4/6 on the camcorder.
5
Press 4/6 on the camcorder and engage the VCR's
Record mode.
6
Engage the VCR's Record-Pause mode and press
4/6 on the camcorder.
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
NOTES:
When connecting the cables, make sure to connect the
ends with a core filter to the camcorder. The core filter
reduces interference.
You can use the AV OUT connector on the camcorder
for connection.
You can use Playback Zoom (
Special Effects ( pg. 47) in step 4.
Before you start dubbing, make sure that the indications
do not appear on the connected TV. If they do, they are
being recorded onto the new tape.
Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video
cable.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 35).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "SIMPLE" in the
Menu Screen (
remote control.

DUBBING

pg. 46) or Playback
pg. 35).
pg. 35). Or, press DISPLAY on the
"