Connectors; Make Connections - JVC GR-DVL140 Instructions Manual

46
USING THE OPTIONAL REMOTE CONTROL UNIT
EN
To JLIP
Audio/Video
cable
(provided)
Editing cable
(optional)
To AUDIO,
VIDEO*
and

connectors

If your VCR has the
SCART connector,
use the provided
cable adapter.
To Remote PAUSE
or R.A.EDIT
To PAUSE IN
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
ATTENTION FOR EDITING CABLE
Make sure you use the optional editing
cable QAM0214-001. Consult the JVC
Service Center for details on its
availability.
Make sure you connect the end with the
core filter (plug which has 3 rings around
the pin) to the camcorder.
Connector cover**
To S
To AV
S-Video
cable
(optional)
-IN
"Y/C"/"CVBS"
video out
select switch
VCR
TV
RM-V700U
(optional)

MAKE CONNECTIONS

Also refer to pg. 22 and 23.
1
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a remote pause
connector but equipped with an R.A. EDIT
connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the remote
control's PAUSE IN connector.
2
Insert a recorded tape into the camcorder. Set the
Power Switch to "
Lock Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's instructions).
NOTES:
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 38).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "LCD/TV" in the
Menu Screen (
Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video cable.
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
" while pressing down the
pg. 38).
pg. 38).
(cont.)