JVC GR-DVL140 Instructions Manual page 37

DEMO
OFF
MODE
ON
CANCEL
CAM
RESET
EXECUTE
ON LCD
SCREEN
LCD/TV
OFF
DATE/
TIME
AUTO
ON
OFF
TIME
CODE
ON
CLOCK ADJ.
: Factory-preset
NOTES:
" SYSTEM" and "
applied when the Power Switch is set to "
Switch is set to " ".
The " DISPLAY" settings are effective even when the Power Switch is set to "
Automatic demonstration will not take place.
Demonstrates certain functions such as Programme AE with special effects,
etc., and can be used to confirm how these functions operate. When "DEMO
MODE" is set to "ON" and the Menu Screen is closed, demonstration starts.
Performing any operation during the demonstration stops the demonstration
temporarily. If no operation is performed for more than 1 minute after that,
the demonstration will resume.
NOTES:
If a tape is in the camcorder, the demonstration cannot be turned on.
"DEMO MODE" remains "ON" even if the camcorder power is turned off.
If "DEMO MODE" remains "ON", some functions will not be available.
After viewing demo, set to "OFF".
Does not reset all settings to the factory-preset.
Resets all settings to the factory-preset.
Keeps the camcorder's display (except the date, time and time code) from
appearing on the connected TV screen.
Makes the camcorder's display appear on screen when the camcorder is
connected to a TV.
The date/time does not appear.
Displays the date/time for approx. 5 seconds in the following cases:
•When the Power Switch is set from "OFF" to "
•When playback starts. The camcorder displays the date/time when scenes
are recorded.
•When the date is changed during playback.
The date/time is always displayed.
Time code is not displayed.
Time code is displayed on the camcorder and on the connected TV. Frame
numbers are not displayed during recording.
Allows you to set the current date and time (
DISPLAY" functions which are set when the Power Switch is set to "
" ( pg. 38). "CLOCK ADJ." only appears when the Power
EN
" or " ".
pg. 12).
" are also
".
37