Installation Overview - eInstruction Interwrite Mobi User Manual

Getting Started Interwrite Mobi™
3

Installation Overview

This section describes what you will be
doing and the order in which you will
be doing it, to facilitate the setup
of your Interwrite Mobi and its
preparation for use.
1. Unpack Your
Interwrite Mobi
The package includes the
Interwrite Mobi and the re-
chargeable Interwrite Interactive
Pen, a Pen tether, a Mini USB
cord, and an eInstruction CD
TM
and a Workspace RF USB Adapter.
2. Charge Your Interwrite Mobi and Interactive
Pen
Your Tablet and Pen must be charged before you can use them. First, place
the Interactive Pen in the Tablet's Pen Slot. Next, plug the Mini USB cord
into the Mini USB Port located at the top of the Tablet and the other end
into a USB Jack at the computer.
3. Install the Interwrite Workspace Software
Install the Interwrite Workspace Software using the CD provided to you
in your Interwrite Mobi kit. The CD will launch automatically. Follow the
prompts to complete the installation.
4. Connect Your Interwrite Mobi
Your Interwrite Mobi must be able to communicate with the Interwrite
Workspace software on your computer. This communication link is estab-
lished wirelessly between radio frequency communication modules—one
built into the Tablet and the other connected to the computer.