Table of Contents
Advertisement
16
EN
Remote Control Unit
You can use the RM-V712U to control the camcorder. When using the remote control, be sure to point it at
the remote sensor. The transmitted beam effective area for indoor use is approx. 5 m. The transmitted beam
may not be effective or may cause incorrect operation if the remote sensor is directly exposed to sunlight or
powerful lighting.
Zoom Buttons (
DISPLAY Button
(
SHIFT Button (
SLOW Rewind/Forward
Buttons (
Left/Right Buttons
(
FADE/WIPE Button
(
pg. 61)
EFFECT Button
(
EFFECT ON/OFF Button
(
pg. 49)
Knob
PAUSE IN connector (
pg. 48)
pg. 58)
pg. 48)
pg. 47)
pg. 48)
pg. 49)
R.A. EDIT Buttons (
START/STOP Button (
pg. 61)
T
W
pg. 61 – 63)
Installing The Battery
The RM-V712U uses one lithium battery (CR2025).
1
PULL OUT BATTERY HOLDER
Pull out in the direction of the arrow while
pressing the knob as shown.
2
INSERT BATTERY IN HOLDER
Insert the battery in the holder, and be sure to
have the "+" mark visible.
3
RE-INSERT HOLDER
Slide the holder back in until you hear a click.
•Read the warning concerning lithium
GETTING STARTED
pg. 18)
AUDIO MONITOR Button
(
pg. 51)
MBR SET Button (
Down Button (
A.DUB Button (
Up Button (
Operation Buttons
(
pg. 48, 58)
batteries (
pg. 2).
(Cont.)
pg. 60)
pg. 48)
pg. 66)
pg. 48)
Advertisement
Table of Contents
