Table of Contents
Advertisement
58
EN
Dubbing
You can copy recorded scenes from the camcorder onto a videotape. Refer to your VCR's instruction manual
for details.
T
W
VCR
(Recording deck)
1
MAKE CONNECTIONS
Connect the AC Charger Station to your VCR
as shown in the illustration on page 54.
Please also refer to your VCR's instruction
manual before dubbing.
2
START PLAYBACK
Press the Play button (4) to play back the
source tape.
3
START RECORDING
While watching on the connected TV, engage
your VCR's record mode from the spot on the
source tape you want to begin recording.
4
PAUSE RECORDING
Engage your VCR's pause mode to stop
recording a segment.
5
END RECORDING
Press the Stop button (5) to stop the source
tape, and engage the VCR's stop mode.
DISPLAY
PLAY
STOP
Player
Remote sensor
Recorder
Stop button
Play button
Lock!
NOTES:
You can use Playback Zoom (
Playback Effects (
Before you start dubbing, make sure that the
indications do not appear on the connected TV. If
they do appear during dubbing, they are being
recorded onto the new tape.
To clear the Playback Sound Mode Display, press
DISPLAY on the remote control.
Select "DISPLAY" and "TIME CODE" from the
Playback Menu (
Date/Time and the Time Code on the recording.
To show or hide all indications, press the
IND.ON/OFF button on the camcorder for longer
than 1 second.
EDITING
Power Dial
Lock button
IND. ON/OFF
button
pg. 48) or
pg. 49) in step 2.
pg. 50) to show or hide the
Advertisement
Table of Contents
