JVC GR-DLS1 Instructions Manual page 55

Playback Effects
These effects allow you to be creative with the playback picture. You can use any one of the 5 effects.
Play button
PLAY BACK / EFFECT
OFF
4
1 CLASSIC FILM
2 MONOTONE
B/W
3 SEPIA
4 STROBE
5 VIDEO ECHO
1 START PLAYBACK
Press the Play button (4).
2
ACCESS P.AE/EFFECT SELECT MENU
Point the remote control at the camcorder's
remote sensor and press EFFECT. The P.AE/
EFFECT Select Menu appears.
3 SELECT P.AE/EFFECT
Move the pointer and highlight bar to the
desired effect by pressing EFFECT. The selected
function is activated and after 2 seconds the
menu disappears.
RM-V711U
(provided)
EFFECT
Lock button
P.AE/EFFECT Select Menu
(Playback)
T W
Power Dial
NOTES:
To deactivate the selected effect, press EFFECT
ON/OFF on the remote control. Pressing it again
re-activates the selected effect.
Repeat from step 2 when you want to change the
selected effect.
When a Playback Effect is activated, Pro Snapshot
modes ( pg. 31) are not possible.
The effects that can be used during playback are
Classic Film, Monotone, Sepia, Strobe and Video
Echo . The effects work the same in playback as they
did in recording. Refer to page 45 for more
information.
55
EN
PLAY
EFFECT ON/OFF
Remote sensor