JVC GR-DLS1 Instructions Manual page 36

36
EN
System Menu
The System Menu allows you to set the following functions: Scene, Beep/Tally, Wind Cut, Sound Mode and
ID numbers.
Power Dial
Lock button
1 SELECT OPERATION MODE
First turn the Power Dial to " ", "5S" or " "
while pressing down the lock button located
on the dial, make sure the LCD monitor is
open fully or the viewfinder is pulled out.
2 ACCESS RECORDING MENU
Press MENU. The Recording Menu appears.
3
ACCESS SYSTEM MENU
Move the pointer and highlight bar to "TO
SYSTEM MENU" by rotating the Select Dial,
then press it. The System Menu appears.
4 SELECT FUNCTION
Place the pointer and highlight bar to the
desired function by rotating the Select Dial,
then press it. The pointer stops blinking,
indicating that the function has been selected.
RECORDING
MENU button Select Dial
5 SET FUNCTION PARAMETERS
Rotate the Select Dial to cycle through the
available settings for the selected function, and
stop when the desired setting appears. Then
press it, and the pointer and highlight bar
automatically move to "RETURN".
•To set the parameters for a different function,
repeat steps 4 and 5.
6 CLOSE SYSTEM MENU
Press the Select Dial twice. Setting is complete
and the System Menu disappears.
Advanced Features (Cont.)
Display
REC MODE SP
WIDE MODE OFF
ZOOM 40X
DIS OFF
GAIN UP AGC
TO DATE / TIME MENU
TO SYSTEM MENU
4
END
Recording Menu
SCENE 5S
BEEP / TALLY ON
WIND CUT OFF
SOUND MODE 32kHz
ID NUMBER 06
RETURN
4
System Menu