Draytek Vigor2760 Series Quick Start Manual page 13

Interface
PWR
I / O
Factory Reset
WLAN
ON/OFF/WPS
VDSL/ADSL
USB (1-2)
LAN (1-4)
Description
Connector for a power adapter.
Power switch.
Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
WLAN WPS - Press this button for 2 seconds to wait
for client device making network connection through
WPS. When the LED lights up, the WPS connection
will be on.
WLAN ON/OFF - Press the button once to enable
(WLAN LED on) or disable (WLAN LED off)
wireless connection.
Connector for accessing the Internet.
Connector for USB storage device or printer or 3G
backup.
Connectors for local network devices.
5
Vigor2760 Series Quick Start Guide