Advanced Bios Features; Cpu Feature; Hard Disk Boot Priority; Virus Warning - IBASE Technology MI912 User Manual

Advanced BIOS Features

This section allows you to configure and improve your system and allows
you to set up some system features according to your preference.

CPU Feature

Hard Disk Boot Priority

Virus Warning

USB Hard Disk Boot First
CPU L3 Cache
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control for OS
OS Select For DRAM>64MB
Report No FDD For WIN 95
Small Logo (EPA) Show
CPU Feature
Press Enter to configure the settings relevant to CPU Feature.
Hard Disk Boot Priority
With the field, there is the option to choose, aside from the hard disks connected,
"Bootable add-in Cards" which refers to other external devices.
Virus Warning
If this option is enabled, an alarm message will be displayed when trying to write
on the boot sector or on the partition table on the disk, which is typical of the
virus.
CPU L1 and L2 Cache
Cache memory is additional memory that is faster than conventional DRAM
(system memory). CPUs from 486-type on up contain internal cache memory, and
most, but not all, modern PCs have additional (external) cache memory. When the
CPU requests data, the system transfers the requested data from the main DRAM
into cache memory, for even faster access by the CPU. These allow you to enable
(speed up memory access) or disable the cache function.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Press Enter
Press Enter
Disabled
Disabled
Enabled
Enabled
Hard Disk
CDROM
LS120
Enabled
Disabled
Disabled
On
Fast
Disabled
6
250
Setup
Enabled
1.4
Non-OS2
No
Disabled
MI912 User's Manual
BIOS SETUP
ITEM HELP
Menu Level >
33