Using Your Mio Link In Water - Mio link User Manual

Battery Life
Every full charge of Mio LINK will provide 8 to 10 hours of use in Heart Rate Mode.
Charging Your Mio LINK
1. Make sure your Mio LINK has been activated.
2. Warning: Make sure the four charging pins on the back of Mio LINK are dry.
Otherwise, dry them gently with a towel.
3. Plug the USB charger into the USB port of your computer.
4. Align the four charging pins on the back of Mio LINK to the four charging pins on the
USB charger. The magnets in the charging pins will help the two pieces lock into place.
The LED light will fade in and out slowly in a light blue color
charging. When the battery is fully charged, the LED light will turn off.
Battery Care Guidelines
Recharge the battery at least once every 6 months.
•
Do not expose Mio LINK to high temperatures.
•
Use your LINK in the temperature range of 5°C to 45°C (41°F to 113°F).
•
Store Mio LINK in the temperature range of 0°C to 25°C (32°F to 77°F).
•
Do not disassemble, puncture, or incinerate the Mio LINK strap or battery.
•
If the band casing breaks and the battery is exposed, keep the battery away from
•
children. Contact your local recycling authority to properly dispose of the band and
battery.
Battery Replacement
The battery lasts for approximately 300 charge cycles. If the battery is charged on a
•
weekly basis, the battery should last for at least 5 years.
When the battery charge length is noticeably shorter than before, visit
•
mioglobal.com/support to find out how to replace the battery.
Contact your local recycling authority for information about disposing of the band or
•
battery.

USING YOUR MIO LINK IN WATER

Mio LINK is water-resistant up to 30 meters and can be worn while swimming.
•
Important: Do not press the Button under water.
•
The accuracy of the heart rate monitor may be reduced in cold water or if you are
•
using large arm movements.
Do not wear your LINK while diving.
•
Wireless communication does not work under water.
•
After swimming, remove the Mio LINK strap from the sensor unit. Rinse both with tap
•
water and gently dry with a soft cloth.
Mio LINK User Guide
to indicate that the battery is
10