Lcd Panel - JVC GC X 3 Instructions Manual

14
CONTROLS, CONNECTORS AND INDICATORS (cont.)
EN

LCD Panel

1 Indicator of initial settings having been
changed
This indicator is displayed if the initial
settings have been changed.
2 Mode display
Displays the current mode.
3 Remaining battery power
indicator
This bar graph gives a rough indication of
how much battery power is remaining.
4 Flash indicator ............................
This indicator is displayed if the flash
button has been pressed and a mode that
generates a flash (auto, forced on, or red-
eye prevention) has been set.
Power Dial and Mode Display
The mode display appears on the LCD panel and screen, when the Power dial is set to certain position.
Refer to the chart below for each mode. Press the DISPLAY button to display the image, when the Power dial
is set to "A", "M" or "V". Hold the Lock button down while turning the Power dial.
Power dial position
SET
B
OFF
A
M
V
1
3 4 5 6
pg. 33
LCD panel
SET UP
STILL PB
—
CAM AUTO
MANUAL
VIDEO
2
7
5 Timer mode indicator .................
This indicator is displayed if the Self timer
button has been pressed and the timer
mode has been set to either "1 second" or
"8 seconds".
6 Macro mode indicator ................
This indicator is displayed if the macro
button has been pressed and the macro
mode has been turned on.
7 Remaining photos counter
This indicates how many photos can still
be taken.
On-screen display
Displays the SET UP menu
Displays the playback image
—
Displays the image
Displays the image
Displays the image
pg. 32
pg. 36
Page
16
31
—
30
34
52