Table of Contents
Advertisement
1
A
For details, refer to "Important symbols for good services".
B
C
- This service manual should be used together with the following manual(s):
Model No.
Order No.
CX-977
CRT2624
CX-1011
CRT2406
- Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
D
SAFETY INFORMATION
This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair
complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty.
If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so
and refer the repair to a qualified service technician.
E
-
CD section precaution
1. Before disassembling the unit, be sure to turn off the
power. Unplugging and plugging the connectors dur-
ing power-on mode may damage the ICs inside the
unit.
F
2
1
2
FX-M8472ZT/UC(P6828)
Mech. Module Remarks
S9
CD Mech. Module:Circuit Description, Mech.Description, Disassembly
3L
Cassette Mech. Module:Mech.Description, Disassembly
FX-M8427ZT/UC
2
3
2. To protect the pickup unit from electrostatic dis-
charge during servicing, take an appropriate treat-
ment (shorting-solder) by referring to "the DISAS-
SEMBLY" on page 69.
3. After replacing the pickup unit, be sure to check the
grating. (See p.59.)
3
4
4
Advertisement
Table of Contents
