Siemens miniTek User Manual page 23

Connect the transmitter with the power plug to a

power supply or charge it regularly.
Use one of the supplied cables to connect the transmit-

ter to an external device (refer to graphic on previous
page).
Press on/off switch to turn the transmitter on.

The LED on the transmitter flashes blue while search-
ing a connection to your miniTek.
Use the supplied adhesive tape to affix the transmitter

at a suitable place.
Press

on.
Press on miniTek to change to the audio source

manually (refer to table "Changing the audio source" in
chapter "Basic function").
flashes while your miniTek is searching for a
connection and it shines constantly if a connection is
established.
The LED on the transmitter shines blue if a connection
is established.
Each time you press
next available audio source according to table „Changing
the audio source" in chapter „Basic functions".
Start the audio transmission on your device.

You can now hear the sound from your external device
for about 3 seconds to turn the miniTek
, your miniTek switches to the
Using the transmitter
EN
ET
LV
LT
RU
BG
HE
23