Advertisement
Tele Eye
III+
I
VX
IP Address Setup for Windows NT/2000
The follow procedures will set your Ethernet Card IP address manually for your local
LAN purpose. Note that these procedures will NOT affect your PC's connection to the
Internet. If you discover that you cannot be able to access to the Internet after applying
the settings, you have to undo the settings or re-install the software provided by your ISP
and retry the steps again.
Step 1: In Windows NT/2000 desktop, select Start > Settings > Control Panel
Step 2: Double click Network and Dial-up Connections > right click Local Area Connections and
choose Properties .
Step 3: Choose Internet Protocol (TCP/IP) and click Properties
IP Address Setup For PC
nstallation Guide
Page 48
Your Ethernet
card
name
Advertisement
