Install Tele Eye Iii+ Vx For Remote Monitoring With Network; Tele Eye Iii+ Vx For Remote Monitoring; Setup Tele Eye Iii+ Vx For Connection In Lan Environment - TeleEye III+ VX Series Installation Manual

Tele Eye
III+
I
VX
INSTALLATION OF
Tele Eye
Install
Tele Eye
A. Setup
Before setting up the transmitter on LAN, you need to prepare the following items:
- A straight through RJ45 Ethernet cable
- An IP address which is unique in your LAN network. Consult your network administrator
if you don't have
Procedures:
1. Follow the steps of setting up
the live video and OSD on the monitor
2. Press the [Menu] button on front panel of
will popup on the monitor as follows
DISPLAY SETUP
ALARM SETUP
SWITCH SETUP
RECORDING SETUP
TRANSMITTER SETUP
EVENT SETUP
ARM/DISARM SETUP
PASSWORD SETUP
EXIT
Installation of Tele Eye III+
nstallation Guide
III+ VX for Remote Monitoring with Network
III+
VX for connection in LAN environment
Tele Eye
Event Rec
[ MAIN MENU ]
for Remote Monitoring
VX
Tele Eye III+
REMOTE MONITORING
III+
VX for local video display, now you can see
Tele Eye
III+
Live Play Menu
•
. . .
. . .
. . .
. . .
•
. . .
. . .
. . .
. . .
SECTION
VX FOR
VX such that the OSD main menu
Use the arrow button to move down to
select the [TRANSMITTER SETUP]
menu. The selected item will be pointed
by a hand icon.
Press the [Enter] button to enter the
selected sub-menu
Page 22
4