Advertisement
Tele Eye
III+
I
VX
Tele Eye III+
Install
VIDEO IN connect to camera
with coaxial cables with BNC
header
Tele Eye
BNC cables
Video Cameras
Procedures:
1. Insert the hard disk cartridge into the hard disk tray of
2. Using the key provided to lock the hard disk cartridge
3. Connect video cameras to input video channels with BNC cable
4. Connect the VIDEO OUT1 to a monitor using BNC cable
5. Plug the DC supply to the power jack from the power adapter
6. Switch on the
first time you use
you will see four cameras on the screen at the same time
Installation of Tele Eye
nstallation Guide
VX for Local Video Display
III+
VX
BNC cable
Tele Eye
III+
VX and you will see the live video on the monitor. For the
Tele Eye
III+
III+
for Local Monitoring
VX
VIDEO OUT connect to coaxial
video cable with BNC header
DC power supply input with
Monitor
Tele Eye
VX, the live display mode is in quad mode, which means
Power Adapter
12VDC, centre positive
III+
VX
Page 9
Advertisement
