Hard Disk Formatting - TeleEye III+ VX Series Installation Manual

Tele Eye
III+
I
VX

Hard Disk Formatting

Hard disk formatting will reconstruct the structure of hard disk so that it is readable by
III+
VX. If you have your own hard disk to install to
disk formatting.
It will be used in the following cases:
1. A new hard disk you just brought
2. No recorded video can be played
3. You want to format the hard disk so as to have a clean recording space, redeem the file
allocation.
Procedures:
1. Press the [Menu] button to pop up the [MAIN MENU] on the screen. Select
[TRANSMITTER SETUP] -> [ADV. DISK SETUP], and press the [Enter] button to
pop up the following sub-menu
Select the [FORMAT DISK] item, and press [Enter] button to confirm the selection. A
2.
message box will pop up as follow
4. Use left/right arrow button to select [YES] and press [Enter] button, the system will
start formatting. The following information will show on OSD.
Hard Disk Installation and Formatting
nstallation Guide
[ ADV. DISK SETUP ]
DISK INFORMATION
FORMAT DISK
SCAN DISK
BACK
ALL DATA WILL BE ERASED,
YES
[ ADV. DISK SETUP ]
FORMATTING...
CANCEL
Tele Eye
[ MESSAGE ]
ARE YOU SURE ?
NO
III+
VX, you must perform hard
. . .
. . .
. . .
20%
Page 35
Tele Eye