Advertisement
Valentine_308
Audio Troubleshooting FAQ's.
Turn on the audio amplifier with the "Standby/On" switch located on the left side of
3.
the unit. NOTE:
"Standby" button one time. The Orange power light should activate. If it doesn't, try pushing the
"Power" button one time.
PC Audio troubleshooting tip:
4.
internal volume controls for the PC. This may require setting volume levels with hardware (keystrokes
or thumbwheels), or through software (Start/Settings/Control Panel/Multimedia).
Turn the "Input" knob until the orange indicator is located beneath the desired source.
5.
Input
Signal Source
A
VCR
A
DVD
B
Not used
C
CD/Cassette
D
Desktop PC
E
Not used
Verify that the "Pure Direct" and CD/DVD Direct Amp" lights are not lit. If they are,
6.
press them one time to deactivate.
9 of 9
Make sure the RED light over the "Standby" switch is not lit. If it is, push the
When using PC audio, make sure that you have set the necessary
Adjust volume levels of VCR programs
Adjust volume level of DVD programs
Adjust volume levels for the CD/Cassette deck
Adjust volume levels for the PC (Web, Powerpoint, CD,
DVD) materials
9/2/03
2:44 PM
Advertisement
