Advertisement
Valentine_308
LCD Projector FAQ's.
The LCD projector in this electronic classroom is capable of projecting PC
and Macintosh computer video signals. The projector is rated at 2000
ANSI lumens, and is optimized to display XGA (1024 x 768) signals.
The unit will also accept and project VGA (640 x 480), and VGA (800
x 600) resolutions. When using video sources such as VCRs, or DVD
players, the projector accepts NTSC and PAL (M, N) and SECAM
signals and outputs them at either 4 x 3 or 16 x 9 aspect ratios.
To activate the LCD projector, use the RED
the projector remote control.
NOTE: Make sure the remote control power switch (located on the side
of the remote) is in the 'on' position.
COMPUTER/VIDEO switching -
VIDEO buttons on the remote to select either a computer or video
(VCR, DVD, laser disk, etc.) signal source.
IMPORTANT !!
Make sure that you turn off the projector (with the projector remote) when you
are done.
Press the power button on the remote control, wait for the dialog box to appear on the screen, and
press the power button a SECOND time to shut off the projector.
8 of 9
"On-Off"
button located on
Use the COMPUTER or
9/2/03
LCD Projector Remote
2:44 PM
Advertisement
