Cruise Control - Chevrolet 2010 Tahoe Owner's Manual

Cruise Control

{
WARNING:
Cruise control can be dangerous where you
cannot drive safely at a steady speed. So, do not
use the cruise control on winding roads or in
heavy traffic.
Cruise control can be dangerous on slippery
roads. On such roads, fast changes in tire traction
can cause excessive wheel slip, and you could
lose control. Do not use cruise control on slippery
roads.
With cruise control, a speed of about 40 km/h (25 mph)
or more can be maintained without keeping your foot on
the accelerator. Cruise control does not work at speeds
below about 40 km/h (25 mph).
When the brakes are applied, cruise control is
turned off.
If the vehicle has StabiliTrak
limit wheel spin, cruise control will automatically
disengage. See StabiliTrak
When road conditions allow the cruise control to be
safely used again, it can be turned back on.
4-8
®
, and the system begins to
®
System on page 5 6.
I
(On/Off): Turns the system on or off. The indicator
light is on when cruise control is on and turns off when
cruise control is off.
+ RES (Resume/Accelerate): Press briefly to make the
vehicle resume to a previously set speed, or press and
hold to accelerate.
SET (Set/Coast): Press to set the speed and activate
cruise control or make the vehicle decelerate.
(Cancel): Press to disengage cruise control without
erasing the set speed from memory.
The cruise control buttons
are located on left side of
the steering wheel.