Connecting The Power Cord To The Ac Outlet; Putting The Batteries Into The Remote Control; Initial Settings - JVC InteriArt HV-28P40BJ Instructions Manual

Setting up your TV
Connecting the power cord to
the AC outlet
Caution
• Operate only from the power source
specified (AC 220 – 240 V, 50 Hz) on
the unit.
• Failure to use the supplied power cord
or to insert it into a correctly earthed
outlet may result in electric shocks.
Putting the batteries into the
remote control
Use two AA/R6 dry cell batteries.
Insert the batteries from the - end, making
sure the + and - polarities are correct.
• Follow the warnings printed on the
batteries.
• Battery life is about six months to one
year, depending on how much you use the
remote control.
• The batteries we supply are only for
setting up and testing your TV, please
replace them as soon as you need to.
• If the remote control does not work
properly, replace the batteries.
6

Initial settings

When the TV is first turned on, it goes into
the initial settings mode, and you will see the
JVC logo. Follow the instructions on the
screen display to make the initial settings.
1 Press the A button on the TV
The power lamp lights green and the JVC
logo appears.
A button
• If the JVC logo does not appear this is
because your TV has already been
turned on for the first time:
use the "LANGUAGE" and "AUTO
PROGRAM" functions to make the
initial settings. For details, see "SET
UP menu" on page 33.
Yellow button
Blue button
7 buttons
Power lamp