T-V Link Functions - JVC InteriArt HV-28P40BJ Instructions Manual

Setting up your TV

T-V LINK functions

When you have a T-V LINK compatible
VCR connected to the EXT-2 Terminal on
the TV, it is easier to set up the VCR and to
view videos. T-V LINK uses the following
features:
To use T-V LINK functions:
A "T-V LINK compatible VCR" means a
JVC video cassette recorder with the T-V
LINK logo, or with one of the following
logos. However, these VCRs may support
some or all of the features described earlier.
For details, see your VCR instruction
manual.
"Q-LINK" (a trademark of Panasonic
Corporation)
"Data Logic" (a trademark of Metz
Corporation)
"Easy Link" (a trademark of Phillips
Corporation)
"Megalogic" (a trademark of Grundig
Corporation)
"SMARTLINK" (a trademark of Sony
Corporation).
Pre-set download
The VCR will automatically download the
registered data on the TV channels from the
TV. This means you do not need to set up the
program channels on your VCR manually.
The preset download function automatically
begins when the initial setting is complete or
whenever you carry out the AUTO
PROGRAM or EDIT/MANUAL functions.
You can also carry out this function using
your VCR controls.
When "FEATURE NOT AVAILABLE" is
displayed:
If "FEATURE NOT AVAILABLE" is
displayed, the download was not performed
correctly. Before trying to download again,
check that:
• the VCR power is turned on
• the VCR is T-V LINK compatible
• the VCR is connected to the EXT-2
terminal
• the SCART cable is fully wired.
10
Direct Rec
"What You See Is What You Record"
You can easily record to VCR the images
that you are watching on the TV.
For details, read the manual for your VCR.
Use your VCR controls. "DEVICE IS
RECORDING" is displayed.
In the following situations, the VCR will
stop recording if the TV is turned off, if
the TV channel or input is changed, or
if the menu is displayed on the TV:
• when recording images from an external
device connected to the TV (for example
a camcorder)
• when recording a TV channel after it has
been unscrambled on a decoder
• when recording a TV channel by using the
TV's output because the VCR's own tuner
cannot properly receive that channel.
You cannot carry out Direct Rec using your
TV's control.
Generally, the VCR cannot record a TV
channel that it cannot receive properly on its
own tuner, even if you can view that TV
channel on the TV. However, some VCRs
can record a TV channel by using the TV's
output if that channel can be viewed on the
TV. For details, see your VCR instruction
manual.
When the VCR is not ready, the following
messages are displayed.
ERROR Cause and
MESSAGE countermeasure
NO The VCR is not able to
RECORDING record.
Check the VCR.
NO The TV input is set to EXT-4.
RECORDING Since the EXT-4 picture
POSSIBLE cannot be output to EXT-2,
DIRECT REC is not possible.
NO The recording device is not
RECORDING, ready to record. Check the
MEDIA VCR tape.
PROBLEM
NO The recording device cannot
RECORDING, record as it is recording or
DEVICE BUSY playing. Check the VCR.
Refer to the VCR instruction manual.