Connecting Other Devices; Connect The Power Cord To The Ac Outlet - JVC AV-21V311, AV-21V511, AV-21V531, AV-25V311, AV-25V511, AV-29V311, AV-29V511, AV-29V531 Instructions Manual

Preparation

4 Connecting other devices

If you are not connecting any other devices, skip step 4 and perform step 5.
• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the
headphones, the TV speakers go off.
• The OUTPUT terminal outputs the video and sound signals which you are viewing on the
TV. You can dub them onto the VCR connected to the OUTPUT terminal.
(The OUTPUT terminal cannot output S-VIDEO signals or component video signals. Also it
cannot output any signals when the TV is turned off.)
• Connect components outputting a component signal (Y/C
to the VIDEO-2 terminal, and set VIDEO-2 SET function to "COMPONENT". (See page 15.)
• The following illustrations are for the AV-21V311/AV-21V511/AV-21V531/AV-25V311/
AV-25V511. Your TV's front and rear panels may not look exactly like the illustrations.
Front
Headphones
Rear
COMPONENT
VIDEO-1
( VIDEO-2 )
INPUT
INPUT
S
OVER
V Y
/
V V
L C
B
/
MONO
R C
R

5 Connect the power cord to the AC outlet

Operate only from the power source indicated on the rear of the TV.
OUTPUT
V
L L
/
MONO
R R R
/C signal), such as a DVD player,
B R
Camcorder or TV game
VCR (for playing)
DVD player
(composite signals)
VCR (for recording)
DVD player
(component video signals)
5