Language; Picture Tilt; Decoder (Ext-2) - JVC InteriArt HV-28P40BJ Instructions Manual

LANGUAGE

The LANGUAGE setting which was
performed in the "Initial settings" (page 6)
can be changed.
1 Choose LANGUAGE, then press
the a or 3 button
A sub-menu of the LANGUAGE function
appears.
> LANGUAGE
OK
D0002-EN
2 Press the 5 and 6 buttons to
choose a language. Then press the
a button

PICTURE TILT

There are cases where the Earth's magnetic
force may make the picture tilt or make
unnatural colours appear in the corner of the
screen. If this happens, you can correct it.
1 Choose PICTURE TILT, then press
the a or 3 button
The sub-menu of the PICTURE TILT
function appears.
> PICTURE TILT
OK
D0018-EN
2 Press the 6 buttons until the
picture becomes level. Then press
the a button

DECODER (EXT-2)

If you have a decoder connected to a T-V
LINK compatible VCR, which in turn is
connected to the EXT-2 terminal, use the
DECODER (EXT-2) function to unscramble
the scrambled TV channels.
1 Turn on the decoder power
2 Display the scrambled TV channel
on the TV
Even if the decoder is working, a
scrambled picture appears.
3 Display the SET UP menu and
choose DECODER (EXT-2)
SET UP
AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
PICTURE TILT
DECODER(EXT-2)
COMPONENT AUTO SELECT
EXT SETTING
OK
D0029-EN
4 Press the 5 buttons to choose
ON
An unscrambled picture appears.
To cancel the DECODER (EXT-2)
function:
Press the 5 buttons to choose OFF.
5 Press the a button to complete
the setting
The T-V LINK menu appears.
T-V LINK
DOWNLOAD TV
OK
EXIT
D0005 -EN
You can send the programme numbers
data to a VCR with the T-V LINK
function.
SET UP menu
ON
ON
RECORDING DEVICE
37