T-V Link Functions - JVC HV-36P38SUE, HV-32P37SUE, HV-28P37SUE Instructions Manual

If "ACI ERROR" is displayed in the
AUTO PROGRAM menu:
"ACI ERROR" denotes that the ACI function
is not working properly. Press the 2 button
to start the ACI function again.
If "ACI ERROR" still appears even after you
have tried to start the ACI function several
times, press the 3 button to start the AUTO
PROGRAM function. It does not cause any
problem because all the TV channels are
registered to the Programme numbers (PR)
by the AUTO PROGRAM function.
Downloading the data to VCR
You can transmit to the latest Programme
numbers (PR) data to the VCR with the T-V
LINK function.
Caution
• Only when the T-V LINK compatible
VCR is connected to the EXT-2
terminal, this operation is enabled.
• Only when the T-V LINK menu is being
displayed, this operation is enabled.
T-V LINK
DOWNLOAD TV VCR
OK
EXIT
D0005-EN
1 Turn on the VCR
2 Press the a a a button a
The data transmission begins.
DOWNLOAD TV VCR
TRANSFER. . . . .
D0037-EN
The T-V LINK menu disappears once the
data transmission ends.
When the T-V LINK menu is
changed over to another menu:
The TV has finished its menu. This new
menu is operated from the VCR. See the
VCR instruction manual for what to do
next.
If "FEATURE NOT AVAILABLE"
appears at the T-V LINK menu:
Check the following three items. Then
press the 2 2 2 2 button to retry data
transmission.
• Has the T-V LINK compatible VCR
been connected to the EXT-2
terminal?
• Has the VCR power been turned on?
• Does the SCART cable that is
connected to the EXT-2 terminal to T-
V LINK compatible VCR have all
proper connections?

T-V LINK FUNCTIONS

When a T-V LINK compatible VCR is
connected to the EXT-2 Terminal on the TV,
it is easier to set up the VCR and to view
videos. T-V LINK uses the following
features:
To use T-V LINK functions:
A T-V LINK compatible VCR is necessary.
The VCR must be connected to the EXT-2
terminal on the TV by a fully wired SCART
cable.
A "T-V LINK compatible VCR" means a
JVC VCR with the T-V LINK logo or a VCR
with one of the following logos. However,
these VCRs may support some or all of the
features described below. For details, refer to
your VCR instruction manual.
"Q-LINK" (a trademark of Panasonic
Corporation)
"Data Logic" (a trademark of Metz
Corporation)
"Easy Link" (a trademark of Phillips
Corporation)
"Megalogic" (a trademark of Grundig
Corporation)
"SMARTLINK" (a trademark of Sony
Corporation)
Setting up your TV
9