Others - Panasonic Diga DMR-EX773 Operating Instructions Manual

Changing the unit's settings
AV2 Settings
Set to match the connected equipment.
≥Press [OK] to show the following settings.
AV2 Input
Set to "S Video" when receiving or recording S Video output from
external equipment.
[Video] [S Video]
Ext Link
This setting cannot be made when the "TV System" is set to
"NTSC" ( 63).
[Ext Link 1] When a digital satellite receiver which transmits a
special control signal recordings via the 21-pin
Scart cable is connected.
Start and stop timings of recording are controlled
by the control signal.
[Ext Link 2] When external equipment with a timer function is
connected.
When it turns on, recording starts.
When it turns off, recording stops.

Others

(All factory default settings are indicated with underlined text.)
Remote Control
Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic products
close together.
[DVD 1]
Use "DVD 1", the factory set code, under normal circumstances.
1 Press [3, 4] to select the code ("DVD 1", "DVD 2" or "DVD 3")
and press [OK].
Remote Control
Setup
Press "" and "OK" together
for more than 5 seconds on the remote
Tuning
control.
Disc
Picture
To change the code on the remote control
2 While pressing [OK], press and hold the numbered button
([1], [2] or [3]) for more than 5 seconds.
3 Press [OK].
∫ When the following indicator appears on the
unit's display
Note
Executing "Shipping Condition" in the Setup menu returns the main
unit code to "DVD 1". Change the remote control code to 1
( step 2).
VQT2J39
64
[DVD 2] [DVD 3]
The unit's remote control code
Change the code on the remote
control to match the main unit's
( step 2).
Clock
This unit usually obtains time and date information from digital
broadcasts and automatically corrects the time several times a
day. However, if the time is not set correctly, use the settings listed
in the method below.
1 Press [3, 4] to select "Off" of "Automatic" and press [OK].
e.g., This screen appears
while receiving a digital
broadcast.
2 Press [2, 1] to select the item you want to change.
The items change as follows:
Hour!#Minute!#Second!#Day!#Month!#Year
^-----------------------------------------------------------------------------------------J
3 Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
4 Press [OK] when you have finished the settings.
The clock starts.
Note
If a TV station transmits a time setting signal, and when
"Automatic" in the Clock setting menu is set to "On", the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.
∫ To change the time offset
When the time is not correct, set "Time offset" (from –2h to +2h).
1 Press [3, 4] to select "On" of "Automatic" and press [OK] in
step 1.
Auto clock setting starts. This takes a few minutes.
"Automatic clock setting completed." screen is displayed.
2 Press [1].
3 Press [3, 4] to select the correct time offset and press [OK].
4 Press [RETURN ].
Time offset below
Clock
Off Auto
Automatic Time offset
Time Date
0 : 00 : 00 1 . 1 . 2010
Number
0 9
Please set clock manually.
CHANGE
SELECT OK: store RETURN: leave
OK
RETURN